Updated October 2026
Glendale is a retail and employment hub with residential streets around it, which means household drains, shop lines and commercial kitchens all in the same postcode. Lake Macquarie Blocked Drains connects you with licensed local drain plumbers who service Glendale.
Why Glendale drains block
The houses here follow the corridor pattern: clay sewer pipe in the older stock, roots in the joints, PVC where lines have been replaced. Nothing unusual, and the fixes are the standard ones.
The commercial side is where Glendale differs. Food premises put fat and oil down their lines every day, and a grease-coated pipe narrows until something ordinary blocks it. Those lines want jetting rather than eeling, because an eel punches a hole through and leaves the coating on the wall to rebuild.
Common causes of blocked drains in Glendale
- Roots in aged clay sewer joints in the residential streets
- Fat and grease in commercial kitchen lines
- Wipes and paper in shared and residential lines
- Sagged sections holding water and catching debris
- Road grit and leaf litter silting up stormwater pits
How a blocked drain gets cleared here
A CCTV drain camera inspection is worth the money on a line of this age, because it tells you whether you have a root problem you can manage or a pipe problem you need to fix. Jet blasting clears the blockage and cleans the pipe wall so it stays clear longer than an eel will manage. If the pipe is cracked or the joints have stepped, pipe relining seals the lot from the inside.
What it costs
A standard clear typically runs $150 to $400, with most jobs around $280. Tree roots in drains typically cost $250 to $600 to clear, and a camera inspection $249 to $600, or $350 to $900 with jetting included. If the pipe needs relining, that is quoted off the footage.
Urgent overflow? Emergency blocked drain call-outs reach Glendale.
Frequently asked questions
Do you connect commercial work?
Yes. Note on the form that it is a commercial property and the job goes to a plumber set up for it, with a jetting unit rather than just an eel.
How often should a grease-affected line be jetted?
It depends entirely on the volume of cooking and whether the grease trap is being serviced properly. A plumber who has jetted your line and seen the camera footage can give you a sensible interval. Anyone quoting an interval without seeing it is guessing.
Who owns the pipe, me or Hunter Water?
Hunter Water looks after the mains in the street and the easements. Everything on your property is yours to maintain, repair and replace, right up to the connection point, and that includes the boundary trap and the inspection shaft. If the shaft is full or overflowing, that can point to a blockage in Hunter Water's main or branch line instead, and Hunter Water asks to be called straight away. A camera inspection is how you prove which side the fault sits on.